If you need to process 50 tons of oilseeds per day, the required oil press capacity depends mainly on daily operating hours and the type of raw material. For a plant operating continuously for 24 hours, the required processing capacity is approximately 2.08 tons per hour. If the plant operates for only 16 or 8 hours, the equipment must have a higher hourly capacity.
Our oil press specifications use T/D to indicate processing capacity based on 24 hours of continuous operation. This provides a reference for comparing machine capacity with your production target.
The required hourly processing capacity can be calculated as follows:
For a 50 TPD oilseed processing plant:
| Daily Operating Hours | Required Hourly Capacity | Equivalent 24-Hour Rated Capacity |
|---|---|---|
| 24 hours | 2.08 TPH | 50 T/D |
| 16 hours | 3.125 TPH | 75 T/D |
| 8 hours | 6.25 TPH | 150 T/D |
For example, if your plant operates for 16 hours per day, an oil press rated at 50 T/D under 24-hour operation will not normally meet the 50-ton daily target. You need equipment with a higher rated capacity or multiple machines working together.
Several QIE oil press models have published capacities close to 50 T/D. Their suitability depends on the raw material and processing method.
The following specifications are based on our product information, with T/D referring to 24-hour continuous operation.
| Model | Rated Capacity | Main Motor Power | Residual Oil in Cake | Equipment Type |
|---|---|---|---|---|
| ZX276 | 50–60 T/D | 75 kW | 6%–8% | Continuous screw oil press |
| ZX28 | 40–60 T/D, depending on raw material | 55 kW | Varies by raw material | Continuous pre-press and one-time pressing machine |
| ZX204 | 50 T/D | 37 kW | ≤16% | Spiral pre-press |
| ZY24(202-3) | 40–50 T/D | 30 kW | 10%–18% | Screw oil pre-press |
These models are not interchangeable. In particular, ZX204 and ZY24(202-3) are pre-press machines generally used in processes involving subsequent solvent extraction or another pressing stage.
ZX276 has a published capacity of 50–60 T/D and a main motor power of 75 kW. It is designed for continuous pressing and can be used with raw materials such as peanut, cottonseed, rapeseed, sunflower seed, rice bran, and corn germ. It may be considered for a 50 TPD mechanical pressing project, subject to confirmation of the specific raw material and operating conditions.
ZX28 is a continuous pre-press and one-time pressing machine. Its published capacity varies by raw material:
The main motor power is 55 kW. This model illustrates why the oilseed type must be considered when matching equipment to a 50 TPD target.
Both models are designed for pre-pressing applications. ZX204 has a published capacity of 50 T/D, a 37 kW main motor, and a cake residual oil specification of ≤16%. ZY24(202-3) has a published capacity of 40–50 T/D and a 30 kW motor. It is intended for preliminary pressing before solvent extraction or for double-pressing processes.
These machines should be selected according to the complete processing route rather than treated as direct replacements for a final mechanical pressing machine.
For a 50 TPD plant, the choice between one large machine and multiple smaller machines depends on the operating schedule and production requirements.
| Configuration | Main Advantages | Considerations |
|---|---|---|
| One large oil press | Centralized equipment arrangement and simpler production management | A machine shutdown may interrupt the pressing operation |
| Multiple smaller presses | More flexible production scheduling and maintenance arrangements | Requires additional motors, supporting equipment, and installation space |
For a plant operating 24 hours per day, one machine with a suitable rated capacity may be sufficient if its actual capacity matches the raw material and process requirements. For shorter operating schedules, multiple machines or a higher-capacity configuration may be necessary to reach the same daily processing target.
The final decision should consider total investment, operating costs, maintenance, and the capacity of the complete production line.
The same 50 TPD target does not necessarily require the same oil press configuration for different oilseeds.
| Oilseed | Processing Considerations |
|---|---|
| Peanut | Shelled or in-shell material, pressing method, and desired cake residual oil |
| Sunflower seed | Hull content, dehulling requirements, and pressing or extraction route |
| Rapeseed | Raw material condition, conditioning, and pressing requirements |
| Cottonseed | Delinting, dehulling, gossypol control, and final product requirements |
| Soybean | Pretreatment and whether the process uses direct solvent extraction or extrusion-assisted extraction |
For example, a peanut pressing plant and a rapeseed pressing plant may have the same daily processing target but require different equipment configurations. Large-scale soybean oil production also commonly relies on solvent extraction rather than conventional screw pressing as the main oil recovery method. Therefore, machine selection should be based on the oilseed type and processing route, not daily capacity alone.
An oil press normally operates as part of a complete processing line. The required supporting equipment depends on the raw material and production method.
| Processing Section | Typical Equipment | Main Function |
|---|---|---|
| Pretreatment | Cleaning screen, crusher, flaking mill, conditioner or cooker | Prepares oilseeds for pressing |
| Pressing | Screw oil press | Extracts oil mechanically |
| Crude oil handling | Oil filter and storage tank | Removes suspended solids and stores crude oil |
| Solvent extraction (if required) | Extractor, desolventizer, solvent recovery system | Recovers additional oil from press cake |
| Refining (if required) | Degumming, deacidification, bleaching, deodorization equipment | Processes crude oil to the required finished oil specifications |
The capacity of the pretreatment and downstream sections should match the pressing section to avoid production bottlenecks.
Before purchasing an oil press for a 50 TPD project, prepare the following information:
These details help determine the required hourly capacity, suitable machine model, and supporting equipment configuration.
We supply screw oil press machines and pre-press equipment for different oilseed processing requirements. For a 50 TPD project, QIE Group can evaluate the required capacity based on the 24-hour rated specifications, daily operating schedule, raw material, and processing route.
Residual oil content indicates how much oil remains in the cake after pressing. It is an important performance indicator, but a lower figure is not automatically better in every process. The target should be evaluated together with the oilseed type, pressing method, and whether the cake will undergo further solvent extraction.
Some screw oil presses can handle several oilseed types, but their processing capacity and operating parameters may differ. Before changing raw materials, the machine configuration, pretreatment conditions, and operating settings should be checked for compatibility.
If pretreatment cannot supply enough prepared material, the oil press may operate below its rated capacity. If pretreatment capacity is much higher, material may accumulate between processing sections. Coordinating the capacities of cleaning, crushing, conditioning, pressing, and downstream equipment helps maintain stable production.
Explore our large screw oil press machines or contact the QIE Group engineering team with your oilseed type, daily processing target, and operating hours to discuss a customized configuration.
Get a Custom 50 TPD Solution & QuoteTell us about your oil processing project. Our engineering and sales team will help you identify suitable equipment and processing solutions.